All gear

Gear by camera

Ricoh GR III accessories

The GR III has been out long enough that the community has settled most of the accessory arguments: a cheap glass protector, one genuine spare battery, something on the wrist, and then the optional stuff - a hood or a cap, a filter adapter, a finder, the GW-4 wide lens. This page lists everything in the catalog that fits the GR III, and every Buy button opens the GR III version.

The order on this page is not my opinion. It is how often GR shooters click through to buy each pick, the same way the recipes are ranked by saves. The GR III recipes are the other half of the setup.

Almost everything here fits the GR IIIx too - the two share a body, a battery and a card slot. The exceptions are the parts that touch the lens: filter adapters are different parts for the III and the IIIx, and viewfinder framelines follow the focal length. The GR IIIx accessories page has those sorted for 40mm.

Most Buy buttons go to Amazon and are affiliate links - as an Amazon Associate, RicohCookBook earns from qualifying purchases, at no extra cost to you. It never changes the order.

35 picks that fit the GR III · most popular first in each category

Screen protectors

A few dollars of insurance for the rear screen - the one thing almost everyone adds.

  • #1 · Screen protectorPer-model sizes
    55

    Cheap tempered glass

    by Any brand

    Any cheap tempered glass does the job - these ULBTER 3-packs are the best-reviewed of the bunch. Just get the size cut for your exact model.

  • #2 · Screen protectorGR III · IIIx · IV
    10

    Tempered glass protector

    by JJC

    A named option if you'd rather not gamble on a no-name pack.

Batteries

The GR sips a small battery fast - carry at least one genuine spare.

  • #1 · BatteryGR III · IIIx
    21

    Genuine battery (DB-110)

    by Ricoh

    The genuine Ricoh cell for the III/IIIx. Third-party batteries tend to run short and fit loose - rarely worth the few dollars. Amazon dropped the genuine listing, so this one goes to B&H.

Viewfinders

Clips into the hotshoe so you can frame with your eye instead of a screen that washes out in sun.

  • #1 · ViewfinderUniversal cold shoe - 28mm native
    23

    VF01 waist-level finder

    by Ulanzi

    28mm framelines (switchable 35/50) with a magnetic flip hood, so it doubles as a waist-level finder. A fifth of the Ricoh's price.

  • #2 · ViewfinderUniversal cold shoe - 35mm framelines
    14

    35mm optical finder

    by TTArtisan

    A cheap, well-made cold-shoe finder. Be aware the framelines are 35mm, so they match neither GR focal length exactly.

  • #3 · ViewfinderGR III · GR IV (28mm framelines)
    5

    External mini finder (GV-2)

    by Ricoh

    Ricoh's own 28mm optical finder - the genuine match for the GR III and GR IV lens, where the GV-3 is cut for the IIIx. Small, bright, and priced like a Ricoh finder.

Wide conversion lenses

Screws on the front and makes the fixed lens meaningfully wider - the one accessory that changes what the camera is.

  • #1 · Wide conversionGR III + GR IV family (21mm) · IIIx via the GA-2 (~30mm)
    23

    GW-4 wide conversion lens

    by Ricoh

    Turns 28mm into 21mm on the GR III and the GR IV family, with no crop and no image-quality complaints. Needs the matching Ricoh GA adapter (GA-1, GA-2 or GA-3), and it is not cheap.

    Needs a Ricoh GA adapter

  • #2 · Wide conversionPer-model kits (III · IIIx · IV family) - adapter included
    10

    Wide conversion kit (PR-10)

    by NiSi

    0.78x wide lens plus NiSi's locking adapter for your body in one box, for well under half the Ricoh lens alone: 28mm to about 21mm on the GR III and GR IV, 40mm to about 31mm on the IIIx.

Memory cards

III-era bodies take full-size SD; the GR IV switched to microSD (plus ~53 GB internal).

  • #1 · Memory cardGR III · IIIx (full-size SD)
    14

    Extreme Pro SD card

    by SanDisk

    The community's default card - the one people report just working, burst after burst, on both III-era bodies.

Wrist straps

Cheap insurance against dropping a small, slippery camera.

  • #1 · Wrist strapUniversal
    67

    Cuff

    by Peak Design

    The default pick - quick-release anchors clip it on and off in a second.

  • #2 · Wrist strapAll GR bodies
    22

    In-box strap + O-ring

    by Ricoh

    Free in the box - a 30-cent O-ring makes the loop actually cinch tight. Lost yours? The leather GS-2 is Ricoh's genuine replacement - Amazon dropped it, so the button goes to B&H.

  • #3 · Wrist strapUniversal
    19

    Paracord strap

    by Various / DIY

    Light and cheap - buy one ready-made or tie your own to any length.

  • #4 · Wrist strapUniversal
    18

    Wii remote strap

    by Nintendo / generic

    A cult favorite - cheap, secure, and the loop fits the eyelet. Plenty of generic versions online.

Hoods & covers

Lens protection and a little flare control - or keep it bare and pocketable.

  • #1 · Hood & coverAll GR bodies (per-model hoods)
    85

    Squarehood

    by Squarehood

    Gorgeous fit and finish, and the community darling - sold direct (not on Amazon). Model-specific versions now cover every body, incl. glass hoods for the HDF and Monochrome; adds some bulk and isn't cheap.

  • #2 · Hood & coverPer-model (III · IIIx · IV family)
    82

    49mm filter adapter

    by NiSi

    Screw on standard 49mm filters. The III, IIIx and IV each take a different adapter, and all three mount securely: NiSi's GR III and IIIx parts lock. NiSi's GR IV part is off Amazon on its own right now (it ships inside NiSi's GR IV wide kit), so the GR IV button goes to JJC's bayonet equivalent.

  • #3 · Hood & coverAll GR bodies
    13

    Stick-on lens filter

    by JJC

    The zero-bulk option - keeps dust out with no added length, and one version now sticks on every GR body (removable 3M adhesive).

  • #4 · Hood & coverPer-model versions
    10

    Metal lens cap

    by JJC

    Rigid metal that protects the front element well.

  • #5 · Hood & coverPer-model (GA-1 · GA-2 · GA-3)
    9

    GA lens adapter

    by Ricoh

    The official adapter with a true mechanical lock - GA-1 for the GR III, GA-2 for the IIIx, GA-3 for the GR IV. Pricier than the third-party parts; the one that never falls off.

Diffusion filters

The soft film glow no recipe can fully fake - mounted via a 49mm adapter (HDF bodies have it built in).

  • #1 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    111

    CineBloom diffusion filter

    by Moment

    The halation filter Reggie shoots on his Color Negative recipe. He runs 5%, the community's sweet spot is 10%, and 20% is the full dreamy bloom - the Buy button goes to 20%, the only strength Amazon currently stocks. For the subtler strengths, the Black Pro-Mist below is the in-stock equivalent.

    Needs a 49mm filter adapter

  • #2 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    72

    Black Pro-Mist 1/8 (49mm)

    by Tiffen

    The subtle strength - Moment's comparison maps this 1/8 to the CineBloom 5% Reggie actually shoots, which has vanished from Amazon. Same quiet film softness, in stock.

    Needs a 49mm filter adapter

  • #3 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    4

    Black Mist 1/4 (49mm)

    by K&F Concept

    The budget mist - about half the CineBloom's price for a similar halation-and-glow effect.

    Needs a 49mm filter adapter

  • #4 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    4

    Black Pro-Mist 1/4 (49mm)

    by Tiffen

    The original cinema mist, at the community's sweet-spot strength: Moment's own comparison maps this 1/4 to the CineBloom 10% - and unlike the CineBloom it's cheaper and reliably in stock.

    Needs a 49mm filter adapter

Cases

Where the camera lives when it's not in your hand.

  • #1 · CaseGR III · IIIx · IV
    28

    Leather case (GC-11)

    by Ricoh

    Ricoh's leather case with a belt loop - per Ricoh one version fits the III, IIIx and IV (the Amazon title just predates the GR IV), and it still fits with a thumb grip on. The GC-12 is the fold-flat sibling.

  • #2 · CaseUniversal - a GR plus spares inside
    20

    1020 Micro Case

    by Pelican

    The crush-proof travel box - a GR rides inside with a lens cap on, plus two spare batteries and a cloth. No foam surgery needed; armor for a bag, not a carry case.

  • #3 · CaseGR III · IIIx · IV
    0

    Leather soft case (GC-12)

    by Ricoh

    The fold-flat sibling of the GC-11: genuine leather that wraps the camera and vanishes in a bag. It will not close over a thumb grip or a hood - bare cameras only.

Pouches & bags

Where the camera rides between shots. (An honorable mention to the beer-koozie faithful; I can't rank that.)

  • #1 · Pouch & bagAll GR bodies
    100

    Small camera bag

    by kinokoo

    The budget pick - a snug fit for a GR plus a spare battery.

  • #2 · Pouch & bagUniversal
    66

    Camera pouch

    by Long Weekend (Moment)

    Padded, light, and the style pick among the pouches you can actually still buy. Amazon dropped every colorway, so the button goes to B&H.

  • #3 · Pouch & bagGR III · IIIx · IV
    2

    Compact camera case

    by JJC

    The structured one - a molded semi-hard pouch with a belt loop, a shoulder strap and a mesh pocket for a spare battery. JJC lists the GR III, IIIx and IV by name.

  • #4 · Pouch & bagUniversal
    99

    Tahoe CS 20

    by Lowepro

    Under $20, genuinely protective, and the front pocket swallows two spare batteries. Amazon dropped it and B&H has been out of stock since August - the Buy button comes back when it does.

    Out of stock at last check

Thumb grips

Clips into the hotshoe for a firmer one-handed hold.

  • #1 · Thumb gripModel-specific versions
    21

    Metal thumb grip

    by JJC

    Buy the version cut for your model so it clears the dial and power button.

Ring caps

The ring around the lens twists off - it is what you remove to mount an adapter - and a colored one is the GR's classic bit of customization.

  • #1 · Ring capPer-model sizes (GN-1 · GN-2 · GN-3)
    0

    Metal ring cap

    by JJC

    A few dollars to change the camera's face, and a spare for the stock ring. Each body takes its own size, and each listing has several colors.

Hot shoe covers

A small cap for the hotshoe - keeps the contacts clean and finishes the top plate when nothing is mounted.

Chargers

The GR charges in-camera over USB-C - an external charger is for keeping the spare topped up.

  • #1 · ChargerDB-110 (GR III · IIIx)
    10

    BJ-11 charger (DB-110)

    by Ricoh

    The official external charger - a fresh spare always waiting while the camera stays in your pocket.

Flashes

The GR has no built-in flash - add one to the hotshoe for fill.

  • #1 · FlashGR IV (works on GR III · IIIx)
    49

    GF-2 flash

    by Ricoh

    Ricoh's own tiny flash - full auto on the GR IV; on the III/IIIx it fires manual/full-discharge (a firmware update adds auto).

  • #2 · FlashUniversal hotshoe
    14

    iM20 mini flash

    by Godox

    A tiny 31 g manual flash (single center-pin, no TTL) - cheap, pocketable fill. The iM30 is the slightly bigger sibling.

Before you buy

  • Battery: DB-110, shared with the GR IIIx. The GR IV uses a different cell (DB-120) and the two are not interchangeable.
  • Storage: full-size SD cards.
  • Filter adapter: the GR III takes Ricoh's GA-1 or NiSi's PR-11 MK II. Both lock to the body.
  • Wide: the GW-4 takes the 28mm lens to 21mm with no crop. It needs a GA adapter.
  • Viewfinders: the lens is 28mm, so Ricoh's GV-3 (40mm framelines) is the wrong one. Ricoh's GV-2 and the universal 28mm finders are the match.
  • The GF-2 flash mounts and fires on the GR III, at manual full discharge unless your firmware has the update that adds auto.

Questions people ask

What are the must-have accessories for the Ricoh GR III?

A tempered-glass screen protector, one genuine DB-110 spare battery, and something on your wrist - the in-box strap with a small O-ring is fine. Those three cover the ways a GR III actually gets hurt or lets you down: a scratched screen, a flat battery, a drop. Everything else is taste.

What SD card is best for the Ricoh GR III?

The SanDisk Extreme Pro is the community default, run without drama. The old advice that fast cards confuse the GR has quietly retired (firmware 1.42 also shipped an SD stability fix). The cheaper SanDisk Ultra has its fans too. Format the card in the camera and avoid sketchy third-party sellers.

Are third-party DB-110 batteries OK for the GR III?

They work, at about half the price, but the recurring complaints are shorter runtimes, loose fits and charge readings you cannot trust. The community's strong preference is one genuine Ricoh spare plus USB-C top-ups inside the camera.

How do I keep dust out of a Ricoh GR III?

Front glass is the community's usual answer. A slim stick-on filter adds no length and keeps the camera pocketable; a filter adapter with a screw-in filter, or a hood with glass, does the same job with more bulk. None of it is a guarantee, and the anti-filter camp will tell you any front glass risks a whisper of sharpness.

Does the GW-4 wide conversion lens work on the GR III?

Yes, that is what it was made for: 28mm becomes 21mm with no crop. It needs a GA adapter, and with a genuine Ricoh GA-1 the camera detects the lens and shows WIDE on screen.

Recipes in your inbox

The best Ricoh GR film recipes, straight to your inbox. No spam, unsubscribe anytime.

Some “Buy” links are affiliate links - as an Amazon Associate, RicohCookBook earns from qualifying purchases, at no extra cost to you. Not affiliated with or endorsed by Ricoh.