All gear

Gear by camera

Ricoh GR IIIx accessories

The GR IIIx is a GR III with a 40mm lens, and that one difference decides which accessories are yours. Body parts are shared: the same DB-110 battery, SD cards, screen protector, lens cap, thumb grip and cases. Lens parts are not: the IIIx takes its own filter adapter, has its own wide conversion options, and it is the one GR that Ricoh's GV-3 finder is actually cut for.

The order on this page is not my opinion. It is how often GR shooters click through to buy each pick, the same way the recipes are ranked by saves. Every recipe for the GR III runs on the IIIx too - they are all on the GR III & IIIx recipes page.

The IIIx is also the best-served body for going wider. Ricoh's GW-4 screws onto the IIIx's GA-2 adapter and takes 40mm to roughly 30mm, and NiSi's kit gets to about 31mm with a locking adapter in the box.

Most Buy buttons go to Amazon and are affiliate links - as an Amazon Associate, RicohCookBook earns from qualifying purchases, at no extra cost to you. It never changes the order.

35 picks that fit the GR IIIx · most popular first in each category

Screen protectors

A few dollars of insurance for the rear screen - the one thing almost everyone adds.

  • #1 · Screen protectorPer-model sizes
    55

    Cheap tempered glass

    by Any brand

    Any cheap tempered glass does the job - these ULBTER 3-packs are the best-reviewed of the bunch. Just get the size cut for your exact model.

  • #2 · Screen protectorGR III · IIIx · IV
    10

    Tempered glass protector

    by JJC

    A named option if you'd rather not gamble on a no-name pack.

Batteries

The GR sips a small battery fast - carry at least one genuine spare.

  • #1 · BatteryGR III · IIIx
    21

    Genuine battery (DB-110)

    by Ricoh

    The genuine Ricoh cell for the III/IIIx. Third-party batteries tend to run short and fit loose - rarely worth the few dollars. Amazon dropped the genuine listing, so this one goes to B&H.

Viewfinders

Clips into the hotshoe so you can frame with your eye instead of a screen that washes out in sun.

  • #1 · ViewfinderGR IIIx (40mm framelines)
    29

    External mini finder (GV-3)

    by Ricoh

    Ricoh's own optical finder, cut for the IIIx's 40mm view. Superb glass, genuinely expensive, and it does not lock to the hotshoe - people lose these.

  • #2 · ViewfinderUniversal cold shoe - 28mm native
    23

    VF01 waist-level finder

    by Ulanzi

    28mm framelines (switchable 35/50) with a magnetic flip hood, so it doubles as a waist-level finder. A fifth of the Ricoh's price.

  • #3 · ViewfinderUniversal cold shoe - 35mm framelines
    14

    35mm optical finder

    by TTArtisan

    A cheap, well-made cold-shoe finder. Be aware the framelines are 35mm, so they match neither GR focal length exactly.

Wide conversion lenses

Screws on the front and makes the fixed lens meaningfully wider - the one accessory that changes what the camera is.

  • #1 · Wide conversionGR III + GR IV family (21mm) · IIIx via the GA-2 (~30mm)
    23

    GW-4 wide conversion lens

    by Ricoh

    Turns 28mm into 21mm on the GR III and the GR IV family, with no crop and no image-quality complaints. Needs the matching Ricoh GA adapter (GA-1, GA-2 or GA-3), and it is not cheap.

    Needs a Ricoh GA adapter

  • #2 · Wide conversionPer-model kits (III · IIIx · IV family) - adapter included
    10

    Wide conversion kit (PR-10)

    by NiSi

    0.78x wide lens plus NiSi's locking adapter for your body in one box, for well under half the Ricoh lens alone: 28mm to about 21mm on the GR III and GR IV, 40mm to about 31mm on the IIIx.

Memory cards

III-era bodies take full-size SD; the GR IV switched to microSD (plus ~53 GB internal).

  • #1 · Memory cardGR III · IIIx (full-size SD)
    14

    Extreme Pro SD card

    by SanDisk

    The community's default card - the one people report just working, burst after burst, on both III-era bodies.

Wrist straps

Cheap insurance against dropping a small, slippery camera.

  • #1 · Wrist strapUniversal
    67

    Cuff

    by Peak Design

    The default pick - quick-release anchors clip it on and off in a second.

  • #2 · Wrist strapAll GR bodies
    22

    In-box strap + O-ring

    by Ricoh

    Free in the box - a 30-cent O-ring makes the loop actually cinch tight. Lost yours? The leather GS-2 is Ricoh's genuine replacement - Amazon dropped it, so the button goes to B&H.

  • #3 · Wrist strapUniversal
    19

    Paracord strap

    by Various / DIY

    Light and cheap - buy one ready-made or tie your own to any length.

  • #4 · Wrist strapUniversal
    18

    Wii remote strap

    by Nintendo / generic

    A cult favorite - cheap, secure, and the loop fits the eyelet. Plenty of generic versions online.

Hoods & covers

Lens protection and a little flare control - or keep it bare and pocketable.

  • #1 · Hood & coverAll GR bodies (per-model hoods)
    85

    Squarehood

    by Squarehood

    Gorgeous fit and finish, and the community darling - sold direct (not on Amazon). Model-specific versions now cover every body, incl. glass hoods for the HDF and Monochrome; adds some bulk and isn't cheap.

  • #2 · Hood & coverPer-model (III · IIIx · IV family)
    82

    49mm filter adapter

    by NiSi

    Screw on standard 49mm filters. The III, IIIx and IV each take a different adapter, and all three mount securely: NiSi's GR III and IIIx parts lock. NiSi's GR IV part is off Amazon on its own right now (it ships inside NiSi's GR IV wide kit), so the GR IV button goes to JJC's bayonet equivalent.

  • #3 · Hood & coverAll GR bodies
    13

    Stick-on lens filter

    by JJC

    The zero-bulk option - keeps dust out with no added length, and one version now sticks on every GR body (removable 3M adhesive).

  • #4 · Hood & coverPer-model versions
    10

    Metal lens cap

    by JJC

    Rigid metal that protects the front element well.

  • #5 · Hood & coverPer-model (GA-1 · GA-2 · GA-3)
    9

    GA lens adapter

    by Ricoh

    The official adapter with a true mechanical lock - GA-1 for the GR III, GA-2 for the IIIx, GA-3 for the GR IV. Pricier than the third-party parts; the one that never falls off.

    Not on Amazon for the GR IIIx

Diffusion filters

The soft film glow no recipe can fully fake - mounted via a 49mm adapter (HDF bodies have it built in).

  • #1 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    111

    CineBloom diffusion filter

    by Moment

    The halation filter Reggie shoots on his Color Negative recipe. He runs 5%, the community's sweet spot is 10%, and 20% is the full dreamy bloom - the Buy button goes to 20%, the only strength Amazon currently stocks. For the subtler strengths, the Black Pro-Mist below is the in-stock equivalent.

    Needs a 49mm filter adapter

  • #2 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    72

    Black Pro-Mist 1/8 (49mm)

    by Tiffen

    The subtle strength - Moment's comparison maps this 1/8 to the CineBloom 5% Reggie actually shoots, which has vanished from Amazon. Same quiet film softness, in stock.

    Needs a 49mm filter adapter

  • #3 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    4

    Black Mist 1/4 (49mm)

    by K&F Concept

    The budget mist - about half the CineBloom's price for a similar halation-and-glow effect.

    Needs a 49mm filter adapter

  • #4 · Diffusion filter49mm, through a filter adapter · skip on an HDF
    4

    Black Pro-Mist 1/4 (49mm)

    by Tiffen

    The original cinema mist, at the community's sweet-spot strength: Moment's own comparison maps this 1/4 to the CineBloom 10% - and unlike the CineBloom it's cheaper and reliably in stock.

    Needs a 49mm filter adapter

Cases

Where the camera lives when it's not in your hand.

  • #1 · CaseGR III · IIIx · IV
    28

    Leather case (GC-11)

    by Ricoh

    Ricoh's leather case with a belt loop - per Ricoh one version fits the III, IIIx and IV (the Amazon title just predates the GR IV), and it still fits with a thumb grip on. The GC-12 is the fold-flat sibling.

  • #2 · CaseUniversal - a GR plus spares inside
    20

    1020 Micro Case

    by Pelican

    The crush-proof travel box - a GR rides inside with a lens cap on, plus two spare batteries and a cloth. No foam surgery needed; armor for a bag, not a carry case.

  • #3 · CaseGR III · IIIx · IV
    0

    Leather soft case (GC-12)

    by Ricoh

    The fold-flat sibling of the GC-11: genuine leather that wraps the camera and vanishes in a bag. It will not close over a thumb grip or a hood - bare cameras only.

Pouches & bags

Where the camera rides between shots. (An honorable mention to the beer-koozie faithful; I can't rank that.)

  • #1 · Pouch & bagAll GR bodies
    100

    Small camera bag

    by kinokoo

    The budget pick - a snug fit for a GR plus a spare battery.

  • #2 · Pouch & bagUniversal
    66

    Camera pouch

    by Long Weekend (Moment)

    Padded, light, and the style pick among the pouches you can actually still buy. Amazon dropped every colorway, so the button goes to B&H.

  • #3 · Pouch & bagGR III · IIIx · IV
    2

    Compact camera case

    by JJC

    The structured one - a molded semi-hard pouch with a belt loop, a shoulder strap and a mesh pocket for a spare battery. JJC lists the GR III, IIIx and IV by name.

  • #4 · Pouch & bagUniversal
    99

    Tahoe CS 20

    by Lowepro

    Under $20, genuinely protective, and the front pocket swallows two spare batteries. Amazon dropped it and B&H has been out of stock since August - the Buy button comes back when it does.

    Out of stock at last check

Thumb grips

Clips into the hotshoe for a firmer one-handed hold.

  • #1 · Thumb gripModel-specific versions
    21

    Metal thumb grip

    by JJC

    Buy the version cut for your model so it clears the dial and power button.

Ring caps

The ring around the lens twists off - it is what you remove to mount an adapter - and a colored one is the GR's classic bit of customization.

  • #1 · Ring capPer-model sizes (GN-1 · GN-2 · GN-3)
    0

    Metal ring cap

    by JJC

    A few dollars to change the camera's face, and a spare for the stock ring. Each body takes its own size, and each listing has several colors.

Hot shoe covers

A small cap for the hotshoe - keeps the contacts clean and finishes the top plate when nothing is mounted.

Chargers

The GR charges in-camera over USB-C - an external charger is for keeping the spare topped up.

  • #1 · ChargerDB-110 (GR III · IIIx)
    10

    BJ-11 charger (DB-110)

    by Ricoh

    The official external charger - a fresh spare always waiting while the camera stays in your pocket.

Flashes

The GR has no built-in flash - add one to the hotshoe for fill.

  • #1 · FlashGR IV (works on GR III · IIIx)
    49

    GF-2 flash

    by Ricoh

    Ricoh's own tiny flash - full auto on the GR IV; on the III/IIIx it fires manual/full-discharge (a firmware update adds auto).

  • #2 · FlashUniversal hotshoe
    14

    iM20 mini flash

    by Godox

    A tiny 31 g manual flash (single center-pin, no TTL) - cheap, pocketable fill. The iM30 is the slightly bigger sibling.

Before you buy

  • Battery and cards: DB-110 and full-size SD, same as the GR III.
  • Filter adapter: Ricoh's GA-2, or NiSi's PR-12 MK II, which has a proper locking design. GR III and GR IV adapters do not fit.
  • The genuine GA-2 is not on Amazon right now, so Ricoh's adapter shows no Buy button for the IIIx rather than one that opens the wrong part.
  • Viewfinder: the GV-3 has 40mm framelines, made for this camera. It does not lock to the hotshoe - a strip of electrical tape under the foot is the community's fix.
  • Universal cold-shoe finders come with 28mm or 35mm framelines, so on a IIIx they only approximate the frame.

Questions people ask

Do GR III accessories fit the GR IIIx?

Body accessories do: batteries, SD cards, screen protectors, lens caps, thumb grips, cases, straps and flashes are all shared. Lens accessories do not: the filter adapter is a different part (GA-2 instead of GA-1), and a viewfinder needs 40mm framelines rather than 28mm.

Can the Ricoh GR IIIx go wider than 40mm?

Yes, two ways. Ricoh's GW-4 was made for the GR III, but the community worked out that it screws onto the IIIx's GA-2 adapter and takes 40mm to roughly 30mm. NiSi's wide conversion kit is built for the IIIx: a 0.78x lens, about 31mm, with a locking adapter in the same box for well under half what the Ricoh lens alone costs.

Which viewfinder fits the Ricoh GR IIIx?

Ricoh's GV-3 is the one cut for 40mm. Owners who love it use it instead of the screen full time. Two honest warnings from people who own one: it is genuinely expensive, and it does not lock into the hotshoe, so more than one owner has had it slide out.

What battery does the Ricoh GR IIIx use?

The DB-110, the same cell as the GR III. It charges inside the camera over USB-C, and Ricoh's external charger for it is the BJ-11. The GR IV's DB-120 is a different battery.

Recipes in your inbox

The best Ricoh GR film recipes, straight to your inbox. No spam, unsubscribe anytime.

Some “Buy” links are affiliate links - as an Amazon Associate, RicohCookBook earns from qualifying purchases, at no extra cost to you. Not affiliated with or endorsed by Ricoh.